LEARN HOW TO INSTALL THE RGB LED SPOTLIGHT?

LEARN HOW TO INSTALL THE RGB LED SPOTLIGHT

The models have a control to change colors, and programming it can be a challenge. So follow the step by step to find out how to install the RGB LED spotlight and configure the control in a practical and quick way.

These led are perfect for use near the pool, in gardens, leisure areas and even for party lighting. Learn step by step how to install an RGB LED spotlight and enjoy the benefits of this product.

HOW TO INSTALL RGB LED SPOTLIGHT?

Installation is quite simple and to do it you will need a pair of gloves, a test wrench, electrical tape and cutting pliers. Depending on where the device will be placed, you will also need a drill. The other materials will be in the box, along with your reflector. Turn off the power to avoid shocks and use the glove to handle the wires.

ANALYZE THE INSTALLATION LOCATION

Analyze the place where your reflector will be installed, observing if it is suitable and will allow you to take advantage of the full potential of the product. It can be fixed to the wall, ceiling, floor or poles.

In some cases it will be necessary to level the wall before placing this angle adjustment bracket. You can do this by using a piece of wood over the surface, leveling the spot with spackle or cement.

PREPARE THE WIRING
Once the first step is defined, prepare the wiring by pulling a power point to the location, as if you were going to install a lamp or a switch. To test if it is working, turn on the power and use the test switch.

INSTALL THE REFLECTOR
Installation is basically done by joining the product’s wires to your power supply, with the help of insulating tape or connectors. It is advisable to connect the ground wire, but you will not always have this installation at home. If this occurs, insulate it with tape.

LEARN HOW TO INSTALL THE RGB LED SPOTLIGHT

HOW TO USE RGB LED SPOTLIGHT CONTROL?

RGB spotlights get their name because they work in three colors: red, green and blue (red, green, blue). They also feature all combinations of these tones.

Thus, you will have lighting in 16 colors, including white. The control has all possible tones, and to choose them, just press the corresponding button. See now how to use the reflector and control.

All RGB-type reflector controls have a transparent seal at the top. You must remove it for the equipment to work.

TURN ON AND OFF THE REFLECTOR BY THE CONTROL

The RGB LED spotlight doesn’t need a switch to turn it on and off, as everything is done by the controller. Also use it to configure color and effects.

CONTROL THE INTENSITY
CONFIGURE THE EFFECTS
ADJUST THE COLOR

As soon as you turn on an effect, it will work switching colors. To leave it at just one, choose the effect and then press the button related to the desired color.

Final Words: LED floodlights in the RGB model are new on the market and can be installed in many places like shop, party venues and clubs, as well as at home. The steps on how to install an RGB LED spotlight are not many, but it is important that you take proper care, wearing protective gloves and turning off the power before the process. As for the control, there are several functions that can be learned easily.

Leave a Reply

Your email address will not be published. Required fields are marked *